Supply and exhaust pipe
● Installation type (C32)
● Installation of the compulsory supply and exhaust pipe of the unit:
a. Upper exhaust installation mode.
Tapping screw
Self tapping screw ST4.2 × 6.5
As shown in the image below, tighten the expander screws to secure them, hang the unit vertically
and screw it in with nuts, insert plastic plugs under it, and screw in the self-tapping screws.
2 mounting holes for plastic plug
with self-tapping screw
90
1 mounting hole for
expander screws
3-Ф8
595,3
>350
Ф 110 ~ Ф 130 round
hole through wall
12
To Next Page
Loading...
