B
baileyadrianAug 21, 2025
What to do if the HTW UAN gas valve is not open?
- LLeslie GarrisonAug 21, 2025
If the gas valve on your HTW Water Heater is not open, fully open the gas valve or replace it with a new gas container.
To Next PageTo Next PageWhat to do if the HTW UAN gas valve is not open?
If the gas valve on your HTW Water Heater is not open, fully open the gas valve or replace it with a new gas container.
What to do if my HTW Water Heater's cold water master valve is not open?
If the cold water master valve is not open, fully open the water inlet master tap.
What to do if the gas pipes of HTW Water Heater are full of air?
If the gas pipes are full of air, open and close the water outlet valve continuously several times until ignition is achieved.
What to do if there is inadequate fresh air intake for my HTW UAN?
If there is inadequate fresh air intake, immediately improve ventilation to ensure adequate fresh air intake.
What to do if my HTW Water Heater power is cut by fault?
If the power is cut by fault, connect the power.
What to do if my HTW Water Heater has a clogged smoke duct?
If the smoke duct is clogged, reuse it after removing foreign objects from the fireplace.
What to do if my HTW Water Heater has discharge distance or abnormal discharge position?
If there is discharge distance or abnormal discharge position, adjust ignition needle and contact maintenance personnel.
What to do if my HTW Water Heater has incorrect water temperature setting method?
If there is an incorrect water temperature setting method, see adjustment procedure for fresh winter-summer air.
What to do if my HTW UAN Water Heater has Freezing?
If there is freezing, contact maintenance personnel.
What to do if my HTW UAN Water Heater has Inlet with inadequate hydraulic pressure?
If there is an inlet with inadequate hydraulic pressure, ask maintenance personnel to check hydraulic pressure.
General| Heating Element | Copper |
|---|---|
| Warranty | 2 years |
| Thermostat | Adjustable |
| Mounting | Wall Mounted |
| Water Connection | 1/2 inch |
Detailed safety advice for water heater operation and installation.
Guidelines to prevent gas leaks and related accidents during use.
Safety measures covering fire prevention, electrical safety, and usage risks.
Breakdown of the product model name and its components.
Visual representation of the water heater's internal components and layout.
Overview of the water heater's key features and capabilities.
Schematic showing the internal electrical connections of the unit.
Initial installation requirements, packing list, and brief introduction.
Details on different installation configurations like C12, C32, and B22.
Instructions for connecting gas and water pipes correctly.
Important warnings and safety guidelines for the installation process.
Steps required before and during the initial ignition of the water heater.
How to operate the unit, adjust temperature, and understand indicators.
Procedures for safely stopping the use of the water heater.
Measures to protect the unit and pipes from freezing in cold climates.
Identifies common problems and provides solutions for user assistance.
