NOTE
Hot water outlet with control panel or line controller. The line controller is optional for clients.
Without a special request from customers, the unit will be equipped with no line controls.
4. METHODS OF USE
17
A reliably grounded receptacle must be installed to the left or right of the unit.
●
Insert the power supply plug and turn it on.
●
● Open the main switch on the gas valve.
● Open the water inlet valve before ignition.
4.1 Preparation before ignition
① Insert the plug
②
③ Fully open the water inlet valve
Be sure to open it fully
before use
Fully open the gas inlet
valve
To Next Page
Loading...
