To Next PageTo Next PageWhat to do if electrical mains tripped with HTW Water Heater?
If the electrical mains are tripping when you use your HTW Water Heater, it is likely due to a short circuit in the element. The suggested solution is to replace the element.
Why is my HTW SMART HTW-TV-080SMART Water Heater water temperature not warm enough?
If the water from your HTW Water Heater isn't warm enough, it could be due to several reasons. First, the element might be defective, and you may need to replace it. Second, the temperature controller might be malfunctioning, requiring you to call customer service for repair. Finally, there might be no power reaching the water heater, in which case you should check the power supply.
What to do if HTW Water Heater is leaking?
If you notice water leaking from your HTW Water Heater, it could be due to a leak in the plumbing connection. Try tightening the connection to resolve this. Alternatively, the leak might be at the gasket. In this case, tighten the element or replace the gasket.
What to do if there is no water from the warm water tap on HTW Water Heater?
If there's no warm water coming from the warm water tap of your HTW Water Heater, the main water valve might not be turned on. Try turning on the main water valve to solve the problem.
How to fix the indicator light that does not light up on HTW SMART HTW-TV-080SMART Water Heater?
If the indicator light on your HTW Water Heater doesn't light up, it could be due to a few reasons. It's possible that the power source is either not connected or poorly connected. Another possibility is that the indicator itself is damaged. Also, the overheating sensor might be activated. In any of these cases, it's recommended to get a professional technician to check the electrical wiring and indicators.
General| Capacity | 80 Liters |
|---|---|
| Power | 2000W |
| Voltage | 220-240V |
| Weight | 25 kg |
| Smart Features | Wi-Fi enabled, remote control via app |
| Frequency | 50Hz |
| Safety Features | Overheat Protection |
