OPERATION THE UNIT
User interface and operation
Electrical heater
‘ON’/’OFF’ button
Unit ‘ON’/’OFF’ button
Set button
Clock/Timer setting button
UP adjust button DOWN adjust button
Operations
1. Power ‘ON’
When turning ‘ON’ the power, whole icons are displayed on the controller screen for 3 seconds.
After checking if everything is ok, the unit enters into the standby mode.
2. button
Press this button and keep for 2 seconds when the unit is standby, the unit can be turned ‘ON’.
Press this button and keep for 2 seconds when the unit is running, the unit can be turned ‘OFF’.
Short press this button to entry or exit the parameter setting or checking.
To Next Page
Loading...
Need help?
General
