Step 1
Plug the receiver into a outlet
Step 2
Press the “Volume” once to adjust the volume of the receiver.
(total 4 volume levels adjustable)
(4)How to change the melody for the sensors
(total 35 melodies optional,match different
melody with different sensor)
Step 1
Plug the receiver into a outlet
Step 2
Activate the sensor first,and then press the “Melody” button
to choose the melody for this sensor
Same steps for other sensors which have been added to
the receiver already.
Volume
(3)How to adjust the alarm volume
(5)How to adjust the sensitivity of the sensor
The sensor has 3 sensitivities adjustable (High, Middle, Low)
Step 1
turn off the sensor by press the ON/OFF button 3 times
10
To Next Page
Loading...