5
(the light of the ON/OFF button will flash
once means the motion sensor was activated
and sent the alarm signal;and then the motion
sensor will back to work mode automatically
after about 10 seconds if not detecting
any movements)
1 foot waya
Step 3
Activate The Wireless Motion Sensor
(wait about 30 seconds after you turned on the sensor)
1st method:press the ON/OFF button twice
(the light of the ON/OFF button will flash once means
the motion sensor was activated and sent the alarm signal)
ON/OFF
( twice)press
2nd method: Ensure the sensor is turned away from you.
and walk through in front of the sensor to acivate
To Next Page
Loading...
