Huawei AR100 Series - Optional) Installing Antennas

Step 2 Install two floating nuts on each front mounting rail. Leave a mounting hole between the two
floating nuts on the same mounting rail.
NOTE
l The length of three adjacent mounting holes may not be 1 U. Observe the scale ticks on the
mounting rails when installing floating nuts.
l You can use a flat-head screwdriver to install floating nuts.
h4
1U
Step 3 Install the router into the cabinet.
1. Use the Phillips screwdriver to install M6 screws on the two lower floating nuts, and
leave 2 mm of the screws out of the floating nuts.
2. Move the router into the cabinet with one hand supporting bottom of the router, and hook
the mounting bracket on the M6 screws.
3. Use the Phillips screwdriver to tighten the lower M6 screws and then the upper M6
screws.
WiFi 1
12V;5A
ADSL
CON/AUX
FXS 3
WiFi 0
FXS 2
FXS 1
FXS 0
FXO
FE3
FE2
FE1
FE0
WAN
RESET
2
mm
a
b
c
----End
4.4 (Optional) Installing Antennas
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
4 Installing AR100/AR120/AR150/AR160/AR200 Series
Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17