Huawei AR100 Series - Connecting Optical Modules and Optical Fibers

PWR
AR2200 Series
EN
EN
CON/AUX
ACTL/A
GE1
GE0
MANAGE
SYS
WAN
RPS
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
Network cable
Ethernet interface of
the remote device
12 13 14 15 16 17 18 19 20 21 22 23
Step 5 Arrange the Ethernet cables to make them parallel, and then bundle them with cable ties. Use
diagonal pliers to cut off redundant cable ties.
Step 6 Remove the temporary labels from the Ethernet cables, and then attach formal labels 2 cm
away from the connectors at both ends.
----End
Follow-up Procedure
Check the following items after connecting Ethernet cables:
l Labels are correctly filled and securely attached to cables, with texts facing the same
direction.
l Cables and connectors are complete, intact, and tightly connected.
5.3.4 Connecting Optical Modules and Optical Fibers
Context
CAUTION
Invisible laser beams will cause eye damage. Do not look into bores of optical modules or
connectors of optical fibers without eye protection.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
5 Installing AR2201-48FE/AR2202-48FE Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
48