Huawei AR100 Series - Page 71

l Wall anchors and mounting screws (separately purchased)
Procedure
Step 1 Use a measuring tape to determine positions of two mounting holes, keep the two positions
aligned, and mark the positions with a marker.
270mm
Step 2 Drill holes and install mounting screws.
1. Choose an appropriate drill bit according to the diameter of the mounting screws. The
diameter of the mounting screws cannot exceed 4 mm.
2. Hammer the hollow wall anchors into the mounting holes.
3. Use a Phillips screwdriver to screw the mounting screws into the wall anchors. Leave the
screws protruding 2 mm from the wall.
2mm
90° 90°
a
c
b
Step 3 Align the mounting holes on the rear of the router with mounting screws and hang the router
on the mounting screws.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
6 Installing the AR1200 Series/AR2204/AR2220E/
AR2220/AR2204E Series Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
65