Step 3 Install floating nuts.
Install two floating nuts on each front mounting rail. Leave a mounting hole between the two
floating nuts on the same mounting rail.
NOTE
l The length of three adjacent mounting holes may not be 1 U. Observe the scale ticks on the
mounting rails when installing floating nuts.
l You can use a flat-head screwdriver to install floating nuts.
Step 4 Support the bottom of the RPS150 with one hand and tighten the screws on the mounting
brackets with the other hand. Tighten the lower screws first, and then the upper screws.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
6 Installing the AR1200 Series/AR2204/AR2220E/
AR2220/AR2204E Series Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
74
To Next Page
Loading...
