Huawei AR1200 Series - Page 105

Buttons and Indicators on the Panel
Table 5-60 describes the buttons and indicators on the 3G-HSPA+7 panel.
Table 5-60 Buttons and indicators on the 3G-HSPA+7 panel
Number
in
Figure
5-20
Indicator Color Description
1 STAT Green If the indicator is steady on, the router
has been powered on, but the system
software is not running.
If the indicator blinks once every 2s (0.5
Hz), the system is running properly.
If the indicator blinks once every 0.25s
(4 Hz), the system is loading software
after power-on or is restarting.
Red
If the indicator is steady on, a fault that
affects services has occurred and
cannot be rectified automatically. The
fault needs to be rectified manually.
Orange If the indicator is off, the software is not
running or is being reset.
2 3G Green If the indicator is steady on, the 3G
signal strength is high.
If the indicator blinks once every 2s (0.5
Hz), the 3G signals strength is low.
If the indicator blinks once every 0.25s
(4 Hz), the 3G signals strength is
medium.
3
2G Green If the indicator is steady on, the 2G
signal strength is high.
If the indicator blinks once every 2s (0.5
Hz), the 2G signals strength is low.
If the indicator blinks once every 0.25s
(4 Hz), the 2G signals strength is
medium.
Huawei AR1200&2200&3200 Series Enterprise Routers
Hardware Description 5 Cards
Issue 03 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
98