Huawei AR1200 Series - Page 106

Number
in
Figure
5-20
Indicator Color Description
4 WWAN Green If the indicator is steady on, the 3G/2G
connection is being established or is
active.
If the indicator is blinking, data is being
transmitted or received over the 3G/2G
connection.
If the indicator is off, the 3G/2G
connection has not been established or
is inactive.
Interfaces
Table 5-61 describes the types and functions of interfaces on the 3G-HSPA+7 interface card.
Table 5-61 Types and functions of interfaces on the 3G-HSPA+7 interface card
Lette
r in
Figu
re
5-20
Name Qu
ant
ity
Description Cable Type
a Antenna
interface
2 The 3G-HSPA+7 interface card provides two
3G interfaces to transmit and receive 3G
service data. One interface is the primary
interface, and the other is the secondary
interface.
3G antenna
b Mini
USB
interface
1 The mini USB interface is used to
commission the 3G module.
Mini USB cable
Interface Attributes
Table 5-62 3G interface attributes
Item
Description
Connector SMA RF: connects to an antenna to provide wireless access.
mini USB: connects to a USB flash drive with third-party wireless
network test software, for example, Qualcomm CAIT.
Huawei AR1200&2200&3200 Series Enterprise Routers
Hardware Description 5 Cards
Issue 03 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
99