Huawei AR1200 Series - Page 72

Number
in Figure
5-8
Indicator Color Description
2 and 3 FE/GE interface
indicators:
l The LINK
indicator is in
green.
l The ACT
indicator is in
yellow.
Green
If the indicator is steady on, a link has
been established.
If the indicator is off, no link is
established.
Yellow If the indicator is blinking, data is being
transmitted or received.
If the indicator is off, no data is being
transmitted or received.
Interfaces
Table 5-13 describes the types and functions of interfaces on the 8FE1GE.
Table 5-13 Types and functions of interfaces on the 8FE1GE
Letter in
Figure
5-8
Name Quan
tity
Description Cable Type
a 10BASE-TX/
100BASE-
TX electrical
interface
8 The 8FE1GE provides
eight FE electrical
interfaces to transmit and
receive FE services.
6.5 Network Cable
b 1000BASE-T
electrical
interface
1 The 8FE1GE provides one
GE electrical interface to
transmit and receive GE
services.
Interface Attributes
Table 5-14 Attributes of 10BASE-TX/100BASE-TX electrical interfaces
Item
Description
Connector type RJ45
Interface attribute MDI/MDIX
NOTE
l The interfaces of most network cards are medium dependent interfaces
(MDIs).
l MDIX interfaces are usually used on hubs or LAN switches.
Huawei AR1200&2200&3200 Series Enterprise Routers
Hardware Description 5 Cards
Issue 03 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
65