Functions and Applications
Functions
The 1GEC provides one GE optical and electrical Combo interface to implement data access
and line-speed switching.
l The Combo interface sends, receives, and processes GE data traffic.
l The electrical interface works at 10/100/1000 Mbit/s in auto-sensing mode.
l The optical interface works at 100/1000 Mbit/s in auto-sensing mode.
Applications
The 1GEC is installed into the SIC slot of the AR1200, AR2220, AR2240 and AR3260.
Panel and Interfaces
Figure 5-10 shows the appearance of the 1GEC panel.
Figure 5-10 Appearance of the 1GEC panel
Buttons and Indicators on the Panel
Table 5-21 describes the buttons and indicators on the 1GEC panel.
Table 5-21 Buttons and indicators on the 1GEC panel
Number
in
Figure
5-10
Indicator Color Description
1 STAT Green If the indicator blinks once 2s (0.5 Hz),
the system is running properly.
If the indicator blinks once 0.25s (4 Hz),
the system is powering on or restarting.
Red If the indicator is red, a fault that affects
services occurs and cannot be rectified
automatically. The fault needs to be
rectified manually.
Huawei AR1200&2200&3200 Series Enterprise Routers
Hardware Description 5 Cards
Issue 03 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
70
To Next Page
Loading...
