Huawei AR1200 Series - Page 78

Number
in
Figure
5-10
Indicator Color Description
Off If the indicator is off, the software is not
running or is being reset.
2 and 3 GE interface
indicators:
l The LINK
indicator is in
green.
l The ACT
indicator is in
yellow.
Green
If the indicator is steady on, a link has
been established.
If the indicator is off, no link is
established.
Yellow If the indicator is blinking, data is being
transmitted or received.
If the indicator is off, no data is being
transmitted or received.
4 and 5 SFP interface
indicators:
l The LINK
indicator is in
green.
l The ACT
indicator is in
yellow.
Green
If the indicator is steady on, a link has
been established.
If the indicator is off, no link is
established.
Yellow If the indicator is blinking, data is being
transmitted or received.
If the indicator is off, no data is being
transmitted or received.
Interfaces
Table 5-22 describes the types and functions of interface on the 1GEC.
Table 5-22 Types and functions of the interface on the 1GEC
Lette
r in
Figur
e
5-10
Name Qu
ant
ity
Description Cable Type
a 1000BA
SE-T
electrica
l
interface
1 The 1GEC provides one GE electrical
interface to transmit and receive GE services.
NOTE
Only one of the optical interface and electrical
interface can be used at a time.
6.5 Network
Cable
Huawei AR1200&2200&3200 Series Enterprise Routers
Hardware Description 5 Cards
Issue 03 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
71