Huawei B593 User Manual

Thank You for Purchasing the LTE CPE!
Generally, the LTE(Long Term Evolution) CPE(customer premises equipment) will be replaced
by the CPE in this guide.
Before You Begin
Check the following items in the product package:
Item Quantity
LTE CPE 1
Power adapter 1
Ethernet cable 1
USB cable 1
Quick Start Guide 1
External antenna(optional) 2
Note:
If you find anything missing or damaged, contact the supplier.
Getting to Know the CPE
Note:
The figures in this guide are provided only for reference, see the actual product for details.
If the problem persists, contact the local service provider.
○
1
POWER indicator
 On: The CPE is powered on.
Note:
Only when the POWER indicator is steady on for more than 60s, a major fault occurs. In
this case, you need to contact the operator for repair.
 Off: The CPE is powered off.
○
2
WLAN indicator
 On: The WLAN function is enabled.
 Blinking: This indicator is blinking when data is transferred through the WLAN.
 Off: The WLAN function is disabled.
○
3
WPS indicator
 Regular blinking: Authentication for WPS accessing is implementing. The indicator blinks
not more than two minutes.
 Irregular blinking: An event or alarm occurs. You need to log in to the WEB UI and
perform related operations.
 On: The WPS function is enabled.
 Off: The WPS function is disabled.
○
4
TEL1/TEL2 indicator
 On: This indicator is on when the CPE of the calling or called party is in off-hook state.
 Blinking: This indicator blinks when the CPE is not switched to the off-hook state during
a call.
 Off: This indicator is off when the CPE is hooked off and there is no calling party.
○
5
MODE indicator
 Blue:
 This indicator is constantly blue when the CPE has accessed the LTE network but no
data is transferred.
 This indicator is blinking blue when the CPE has accessed the LTE network and data
is transferred.
 Green:
 This indicator is constantly green when the CPE has accessed the UMTS network
but no data is transferred.
 This indicator is blinking green when the CPE has accessed the UMTS network and
data is transferred.
 Orange:
 This indicator is constantly orange when the CPE has accessed the GSM network
but no data is transferred.
 This indicator is blinking orange when the CPE has accessed the GSM network and
data is transferred.
 White: This indicator is blinking white when the CPE is accessing the wireless network.
 Red: This indicator is constantly red when the CPE fails to access the wireless network or
the CPE does not access the wireless network.
 Mulberry: This indicator is on when the SIM cannot be identified or the PIN is not
entered or the PIN check fails.
 Off: This indicator is off when the CPE does not access the wireless network.
○
6
SIGNAL indicator
 On: This is a five-bar indicator. The more bars that are on, the stronger the wireless
signals.
 Off: This indicator is off when no signal is detected.
○
7
SIM card slot
This slot is for inserting the SIM card.
○
8
POWER button
○
9
USB port
This port is for connecting the USB storage device or USB printer(optional).
Note:
This port is not for connecting the USB host device, such as a PC.
○
10
POWER port
This port is for connecting to a power adapter.
○
11
USB port
○
12
TEL1/TEL2 ports
These ports are connecting to telephones or faxes (optional).
○
13
LAN1–LAN4 ports
These ports are for connecting to computers, switches, or other LAN devices.
○
14
LAN1–LAN4 indicators
 On: This indicator is on when an Ethernet device has been connected to the relevant
port.
 Blinking: Data is being transmitted over the corresponding port.
 Off: This indicator is off when an Ethernet device is not connected to the relevant port.
○
15
WPS button
When the WPS function is enabled, you can enable the WPS access function by holding
1
2
3
10
7
8
9
11
12
13
14
1
6
1
7
1
5
4
5
6
18

Huawei B593 Specifications

General

Wi-Fi Standards	802.11b/g/n
Wi-Fi Frequency	2.4 GHz
SIM Card Slot	Yes
Weight	500 g
Data Link Protocol	Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Cellular Protocol	LTE
WAN Ports Qty	1
Max Download Speed	100 Mbps
Max Upload Speed	50 Mbps
Power Supply	12V DC
Category	Wireless Router
LTE Bands	800/900/1800/2100/2600 MHz
Ethernet Ports	4
USB Ports	1
Antenna	External
Security	WEP, WPA, WPA2
Model	Huawei B593

Summary

Before You Begin

Getting to Know the CPE

Power Indicator

Describes the state of the power indicator on the CPE.

WLAN Indicator

Details the WLAN indicator states for enabled, data transfer, and disabled.

WPS Indicator

Explains the WPS indicator behavior during authentication and alarms.

TEL1/TEL2 Indicator

Describes the states of the TEL1/TEL2 indicator related to call status.

Mode Indicator

Explains the MODE indicator colors for network access status.

Signal Indicator

Details the five-bar signal indicator for wireless signal strength.

SIM Card Slot

Identifies the slot for inserting the SIM card.

Power Button

Describes the function of the POWER button to turn the CPE on/off.

USB Port

Describes the USB port for connecting storage devices or printers.

Power Port

Identifies the port for connecting the power adapter.

TEL1/TEL2 Ports

Identifies ports for connecting telephones or faxes.

LAN1-LAN4 Ports

Describes ports for connecting computers, switches, or other LAN devices.

LAN1-LAN4 Indicators

Explains LAN indicator states for connection and data transfer.

WPS Button

Explains how to enable WPS access by holding the button.

Device Buttons and Ports

Reset Button

Describes how to restart or restore default settings using the reset button.

WLAN Button

Explains how to enable or disable the WLAN function via the WLAN button.

External Antenna Ports

Identifies ports for connecting external antennas.

Connecting the CPE

Placing the CPE

Provides guidance on optimal placement of the CPE for signal reception.

Connecting Devices to the CPE

Details the steps for connecting power, LAN, and telephone devices.

Accessing the Web-Based Utility

Explains how to access the CPE configuration interface via a web browser.

Troubleshooting and FAQ

For More Information

Guides users to access online help for advanced settings and configuration.

Power Indicator Not On

Troubleshooting steps for when the power indicator is not lit.

Calls Cannot Get Through

Diagnoses issues preventing calls from connecting.

Web-Based Utility Cannot Be Accessed

Provides solutions for accessing the CPE's web configuration interface.

Wireless Network Cannot Be Detected

Offers solutions for issues with detecting the wireless network.

Power Adapter Overheating

Provides advice on preventing the power adapter from overheating.