Do you have a question about the Huawei B311As-853 and is the answer not in the manual?
Device Type | 4G LTE Router |
---|---|
Product Type | Wireless Router |
Download Speed | 150 Mbps |
Upload Speed | 50 Mbps |
Wi-Fi Standard | 802.11b/g/n |
Wi-Fi Speed | 300 Mbps |
Wi-Fi Users | 32 |
Weight | 300 g |
Power Supply | 12V/1A |
Chipset | Qualcomm |
LTE Category | LTE Category 4 |
Supported Frequency Bands | B1/B3/B5/B8/B38/B40/B41 |
Ethernet Ports | 1 |
SIM Card Slot | Standard SIM |
Antenna | 2 x LTE antenna ports (SMA-female) 2 x Wi-Fi antennas (internal) |
Details the device's WAN, LAN, WLAN, bands, ports, and antennas.
Lists specifications for built-in LTE and Wi-Fi antennas, including frequency, efficiency, and gain.
Covers LTE features, mobile network, gateway functions like DHCP, NAT, ARP, and ICMP.
Describes accessing the Internet via mobile and Ethernet networks.
Details SMS features like writing, sending, receiving, and group sending.
Details firewall and PIN protection for security.
Details VPN client and pass-through capabilities.
Allows passing the WAN IP address directly to a PC or Router.
Explains IPv6 only support with CLAT and IPv4v6 dual stack functionality.
Details support for establishing and maintaining two APNs for data and TR-069 services.
Covers connecting HiLink devices via WPS for an expanded network.
Describes local configuration and management via Web UI and SmartHome APP.
Details remote management of CPE software/parameters via TR-069.
Covers remotely updating device firmware via the HOTA server.
Explains the system structure with modules like Ethernet, LTE access, AP, DHCP/DNS, and Web management.
Lists limitations for household/SOHO use, IP Pass-Through, VPN client, and WLAN device limits.
Lists product standards and protocols for Physical layer, IP, ICMP, TCP, UDP, DHCP, NAT.