EasyManua.ls Logo

Huawei BTS3900 GSM User Manual

Huawei BTS3900 GSM
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
BTS3900(A) GSM
V300R008
Commissioning Guide
Issue 02
Date 2009-04-20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

Table of Contents

Other manuals for Huawei BTS3900 GSM

Question and Answer IconNeed help?

Do you have a question about the Huawei BTS3900 GSM and is the answer not in the manual?

Huawei BTS3900 GSM Specifications

General IconGeneral
BrandHuawei
ModelBTS3900 GSM
CategoryAccessories
LanguageEnglish

Summary

About This Document

1 Changes in BTS3900(A) GSM Commissioning Guide

2 General Requirements for the Commissioning

2.1 Commissioning Resources

Lists tools, software, and information required for the commissioning process.

2.2 Commissioning Prerequisites

Details the necessary checks before starting the commissioning procedure.

3 Commissioning Procedure

Commissioning procedure (transmission available)

Outlines the step-by-step process for commissioning the BTS when transmission is available.

Commissioning procedure in transmission unavailable scenario

Details the process for commissioning the BTS when transmission is unavailable, in two phases.

4 Commissioning the BTS (Transmission Available)

4.1 Starting the LMT

Describes how to start, log in, and access the Local Maintenance Terminal (LMT).

4.2 Checking the Transmission and Networking

Verifies that transmission and network connections are correctly installed and functioning.

4.3 Checking Software Version and Data Configuration

Ensures the correctness of software versions and data configurations on BTS boards.

4.4 Checking the Alarm Information of the BTS (on the LMT)

Details how to check, identify, and handle BTS alarms using the LMT interface.

4.5 Commissioning the BTS Services

Tests CS and PS services using a mobile station to verify BTS operational capability.

4.6 Checking the BTS Environment Alarms

Covers procedures for checking and monitoring BTS environment alarms.

5 Commissioning the BTS (Transmission Unavailable)

5.1 Starting the Site Maintenance Terminal

Explains how to start, connect, and log in to the Site Maintenance Terminal (SMT).

5.2 Configuring the Basic Data of the BTS

Describes configuring essential BTS data, including boards and logical objects, on the SMT.

5.3 Checking the Active Software Version on the SMT

Verifies the software versions of boards and modules using the SMT interface.

5.4 Checking the Transmission Between the BBU and RFU on the BTS Side

Checks BBU-RFU transmission link status to diagnose and rectify connection faults.

5.5 Checking the Running Status of the BTS

Assesses BTS operational status by examining LEDs and alarms via the SMT.

5.6 Checking the Hardware Connection of the BTS

Verifies hardware connections including power, grounding, and signal cables.

6 Optional Commissioning Tasks

6.1 Commissioning the Antenna System

Details commissioning the antenna system, including VSWR measurement and output power checks.

6.2 Performing the Loopback Test

Explains how to perform carrier and channel loopback tests to verify transmission links.

6.3 Checking the DIP Switch Settings of the Boards

Verifies the correctness of DIP switch settings on BTS boards against requirements.

6.4 Locally Checking the Transmission Between the BBU and the BSC

Checks BBU-BSC transmission, focusing on LEDs, E1 cable, and surge protection.

6.5 Checking the Transmission Between Cascaded TRXs

Describes checking transmission between cascaded TRXs across different levels of hierarchy.

6.6 Checking TRXs in Ring Topology

Details how to check TRX ring topology configuration and identify faults.

7 FAQs for BTS Commissioning

7.1 Failed Communication Between the SMT and the BTS

Analyzes causes and suggests handling for SMT-BTS communication failures.

7.2 Faulty E1 Link

Discusses symptoms, causes, and handling suggestions for faulty E1 links.

7.3 Failure of an MS to Search the Network

Examines symptoms and analyzes causes for mobile station network search failures.

7.4 Service Dialing Failure

Analyzes causes and provides troubleshooting suggestions for service dialing failures.

7.5 Low GPRS Data Transmission Rate

Investigates reasons for low GPRS data rates and suggests potential solutions.

8 Commissioning Record Data Sheet

9 Communication Ports Used by the GBTS

Related product manuals