Huawei BTS3902E WCDMA

Other manuals for Huawei BTS3902E WCDMA

Hardware Description68 pages

Need help?

Do you have a question about the Huawei BTS3902E WCDMA and is the answer not in the manual?

Summary

About This Document

Document Purpose and Audience

Describes the procedures for installing a BTS3902E, its intended audience, and the document's organization.

Document Conventions

Explains symbols, general text, command, GUI, keyboard, and mouse conventions used in the manual.

1 Changes in the BTS3902 E WCDMA Installation Guide

2 Installation Preparations

2.1 Tools and Instruments

Lists all required tools and instruments for the installation process.

2.2 Skills and Requirements for Onsite Personnel

Details qualifications and training necessary for installation engineers.

3 Information About the Installation

3.1 BTS3902 E Exterior

Describes the exterior design of the BTS3902E, including its modular design and optional housing.

3.2 BTS3902 E Ports and Indicators

Details the location of ports and indicators on the BTS3902E for status monitoring.

3.3 BTS3902 E Installation Options

Describes the different ways a BTS3902E can be installed, such as on a pole, wall, or wood pole.

3.4 Installation Clearance Requirements

Specifies the necessary clearances for installing a BTS3902E on various surfaces.

4 Unpacking the Equipment

5 Obtaining the ESN

6 Installation Process

7 Installing a BTS3902 E

7.1 Mounting Kits for BTS3902 E Installation

Describes the brackets and attachment plate used for mounting the BTS3902E.

7.2 Installing BTS3902 E on Pole (60-114 mm)

Details the procedure and precautions for installing on poles with diameters 60-114 mm.

7.3 Installing BTS3902 E on Pole (114-400 mm)

Details the procedure and precautions for installing on poles with diameters 114-400 mm.

7.4 Installing BTS3902 E on Wall

Provides the procedure and precautions for installing the BTS3902E on a wall.

7.5 Installing BTS3902 E on Wood Pole

Outlines the procedure and precautions for installing the BTS3902E on a wood pole.

8 Installing AC Surge Protection Box and Cables

8.1 AC Surge Protection Box Dimensions and Clearance

Details the dimensions and clearance requirements for installing an AC surge protection box.

8.2 AC Surge Protection Box Installation Options

Describes the different mounting options for an AC surge protection box.

8.3 Installing the AC Surge Protection Box

Provides the procedure for installing the AC surge protection box.

8.4 Installing Cables for AC Surge Protection Box

Details the procedure for connecting cables to the AC surge protection box.

9 Installing Cables

9.1 Cabling Requirements

Specifies routing and binding requirements for cables to prevent signal interference.

9.2 Cable Connections

Illustrates cable connections for the BTS3902E based on configuration and ports.

9.3 Installing PGND and Equipotential Cables

Details the procedure for installing protection ground (PGND) and equipotential cables.

9.4 Installing BTS3902 E Power Cable

Describes connecting the BTS3902E to an external power device.

9.5 Installing BTS3902 E RF Jumper

Explains how to install an RF jumper when an external antenna is used.

9.6 Installing Transmission Cables

Covers the installation of Ethernet or fiber optic cables for transmission.

9.7 Installing Housing

Describes procedures for installing the upper housing and optional camouflage shell.

9.8 Checking BTS3902 E Hardware Installation

Provides a checklist to verify the correct hardware installation of the BTS3902E.

9.9 Performing Power-On Check

Details the procedure for performing a power-on check after installation.

9.10 Appendix

Contains supplementary information, including adding OT terminals and installing ground clips.