Figure 9-25 Closing the housing and tightening the screws
----End
9.8 Checking the BTS3902E Hardware Installation
This chapter describes how to check the hardware installation after a BTS3902E is installed.
Table 9-3 provides the checklist for the BTS3902E hardware installation.
Table 9-3 Checklist for the BTS3902E Hardware Installation
SN
Item
1 The position for each device conforms to the engineering drawing and meets the
space requirement. Sufficient space is reserved for equipment maintenance.
2 The BTS3902E is securely installed and the installed BTS3902E has a housing.
3 In the wall-mounted scenario, the holes of the mounting bracket are well aligned
with the holes of the expansion bolt assemblies. In addition, the adapting plates are
secured on the wall evenly and steadily.
4 In the pole-mounted scenario, the supports for the mounting brackets are secured
on the pole.
BTS3902E WCDMA
Installation Guide 9 Installing Cables
Issue Draft A (2011-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-25
To Next Page
Loading...
Need help?
General
