Huawei BTS3902E WCDMA - Figure 3-8 BTS3902 E Installed on a Pole

Figure 3-8 shows a BTS3902E installed on a pole.
Figure 3-8 BTS3902E installed on a pole
Installing a BTS3902E on a Wall
The wall on a BTS3902E is installed must meet the following requirements:
l When a single BTS3902E is installed, the wall has a capacity of bearing at least four times
the weight of the BTS3902E.
l Expansion bolts must be tightened to 30 N·m (265.52 lbf·in.) to ensure the bolts work
properly and the wall remains intact without cracks in it.
Figure 3-9 shows a BTS3902E installed on a wall.
3 Information About the Installation
BTS3902E WCDMA
Installation Guide
3-8 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue Draft A (2011-06-30)