EasyManuals Logo

Huawei E220 Quick Guide

Huawei E220
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
2
Note:
y Improper configuration may degrade the
computer performance.
y For Windows XP, it is recommended to
install patches such as Service Pack 2 or
above.
y For Windows 2000, it is recommended to
install patches such as Service Pack 4 or
above.
Preparing E220
1) Remove the UMTS subscriber identity
module/subscriber identity module
(USIM/SIM) card slot from the E220.
Then insert the USIM/SIM card into the
card slot, as shown in the following
figure. Make sure that the USIM/SIM
card is fully in place.
2) Insert the card slot into the E220, as
shown in the following figure.
Installation Instructions
The installation procedures of the E220
Manager vary with operating systems (OSs).
Refer to the actual installation instructions
during the installation process.
1. Connecting the E220 with
a Computer
Note: First, power on a computer. Then
connect the E220 with the computer.
Otherwise, the normal installation of the
E220 can be affected.
The following figure is the sketch map of the
data cable.
Auxiliary USB
data cable
Mini-USB
data cable
Mini-USB
connector

Other manuals for Huawei E220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei E220 and is the answer not in the manual?

Huawei E220 Specifications

General IconGeneral
TypeUSB Modem
NetworkHSDPA/UMTS/EDGE/GPRS/GSM
Upload SpeedUp to 384 Kbps
EDGE SpeedUp to 236.8 Kbps
GPRS SpeedUp to 85.6 Kbps
Frequency BandsHSDPA/UMTS 2100 MHz, GSM/GPRS/EDGE 850/900/1800/1900 MHz
InterfaceUSB 2.0
CompatibilityWindows 2000/XP/Vista, Mac OS X
Data Transfer Rate7.2 Mbps (HSDPA)

Related product manuals