Huawei E5 - Page 20

20
• Note: To disable Wi-Fi, press and hold the button until indicator is
off..
• Establishing a WPS Connection
• If the Wi-Fi Clients are connected with the E5 that supports WPS,
the E5 can generate a network key without manual input. To
establish a WPS connection, do as follows:
» Power on the E5. .
» Start the Clients connected with the E5.
» Enable the WPS function of the E5.
• Note: After the Wi-Fi is enabled, press and hold Connect.
» Enable the WPS function of the Clients.
• Note: For the Wi-Fi operations of the Clients see the Clients’ user
guide.
User manual