The HUAWEI E5336 Mobile WiFi is a high-speed packet access mobile hotspot, designed as a multi-mode wireless terminal for SOHO (Small Office and Home Office) and business professionals. It allows users to surf the Internet and send/receive messages/emails cordlessly within the service area of HSPA+/HSPA/UMTS or EDGE/GPRS/GSM networks. The device is fast, reliable, and easy to operate, offering many new features and services to mobile users.
Function Description
The E5336 supports various standards and provides several services.
Supported standards include:
- High Speed Packet Access Plus (HSPA+)
- High Speed Uplink Packet Access (HSUPA)
- High Speed Downlink Packet Access (HSDPA)
- Universal Mobile Telecommunications System (UMTS)
- Enhanced Data rates for Global Evolution (EDGE)
- General Packet Radio Service (GPRS)
- Global System for Mobile communications (GSM)
The E5336 provides the following services:
- HSPA+ packet data service
- HSPA/UMTS packet data service
- EDGE/GPRS packet data service
- Short Message Service (SMS)
The device can be connected to a computer via its USB interface or accessed through Wi-Fi. It functions as a wireless modem when Wi-Fi is enabled, allowing up to ten wireless users to access the E5336 simultaneously. The WLAN can be set up with the access point (AP) function. When connected via USB, the device automatically displays a Web page on the PC desktop, enabling network connection, email, and file downloads.
A key feature is 3G/Wi-Fi Auto Offload, which allows the E5336 to access the Internet via either 3G or Wi-Fi. In areas with a Wi-Fi hotspot (e.g., airport, cafe, hotel, home), the E5336 automatically switches to Wi-Fi connection, helping users save on 3G network traffic fees. When this function is enabled, up to nine wireless users can access the E5336 simultaneously.
The E5336 also supports sharing data stored on a microSD card. Once a microSD card is inserted, users can store data on it or use the Web management page to share the stored data.
Important Technical Specifications
The E5336 comes in three branch types: E5336s-2, E5336Bs-2, and E5336Bs-6. The specifications primarily focus on the E5336Bs-2 and E5336Bs-6 models.
Hardware Specifications:
- WAN Standard: HSPA+/HSPA/UMTS/EDGE/GPRS/GSM
- WLAN Standard: IEEE 802.11b/g/n
- Internal Memory: 128 MB Flash, 64 MB DDR SDRAM
- Maximum Transmitter Power:
- UMTS: 24 (+1/-3) dBm
- WLAN: 802.11b: 14 (+/-3) dBm; 802.11g: 11 (+/-3) dBm; 802.11n: 9 (+/-3) dBm
- Receiver Sensitivity (WLAN):
- 802.11b: -76 dBm@11 Mbit/s
- 802.11g: -65 dBm@54 Mbit/s
- 802.11n: -64 dBm@65 Mbit/s
- WLAN Speed:
- 802.11b: Up to 11 Mbit/s
- 802.11g: Up to 54 Mbit/s
- 802.11n: Support MCS0-MCS7; Up to 72.2 Mbit/s.
- Maximum Power Consumption: 3.5 W
- Power Supply: AC: 100-240 V; DC: 5 V, 1 A
- Battery: Type: Li (rechargeable); Capacity: 3.7 V, 1500 mAh
- Maximum working time: 5–6 hours (depending on the network)
- Maximum standby time: 300 hours (depending on the network)
- External Interfaces: Micro USB interface, Standard microSD card interface, Standard 6-pin SIM card interface
- Screen: TFT-LCD
- Key-press: Power switch, MENU switch, Reset switch
- Antenna: Built-in UMTS/GSM main antenna, Built-in UMTS diversity antenna, Built-in WLAN antenna
- Dimensions (H × W × D): 14.5 mm × 93.2 mm × 60.0 mm
- Weight: About 80 g (including the battery)
- Temperature: Operating: 0°C to +35°C; Storage: -20°C to +60°C
- Humidity: 5% to 95% (non-condensing)
Operating Frequencies:
- E5336Bs-2:
- HSPA+/HSPA/UMTS: 2100/900 MHz
- EDGE/GPRS/GSM: 1900/1800/900/850 MHz
- WLAN: 2400-2483.5 MHz
- E5336Bs-6:
- HSPA+/HSPA/UMTS: 2100/1900/850 MHz
- EDGE/GPRS/GSM: 1900/1800/900/850 MHz
- WLAN: 2400-2483.5 MHz
Software Specifications:
- SMS: Writing/Sending/Receiving, Sending/Receiving extra-long messages, Storage for up to 500 messages in internal memory, New message prompt.
- Network Connection Setup: APN management (create, delete, edit), Set up network connection.
- WLAN Setup: SSID broadcasting and hiding, Open system and shared key authentication, ASCII and HEX keys, 64/128-bit WEP encryption, 256-bit WPA-PSK and WPA2-PSK encryption, AES encryption algorithm, TKIP and AES integrated encryption algorithm, Automatic adjustment of ratios, Display STA status, Turn off Wi-Fi automatically, WLAN MAC filter.
- Firewall Setup: Firewall Switch, LAN IP Filter, Virtual Server, ACL Service, DMZ Service, UPnP Service.
- NAT Setup: CONE NAT, Symmetric NAT, ALG, VPN passthrough.
- DHCP Setup: DHCP server enabling and disabling, Address pool setup, DHCP lease time setup.
- Software Installation: Automatic installation (PnP).
- 3G/Wi-Fi Auto Offload: Accessing WAN via 3G or Wi-Fi, Automatic offload between 3G and Wi-Fi.
- IPv6/IPv4 Dual Stack (optional): DHCPv6/v4 server and client, DNSv6/v4 server and client, Display IPv6/v4 WAN address.
- Other: Network connection settings (automatic/manual selection and registration), Network status display (signal, operator name, system mode), Selection of network connection types (3G Only, Auto), PIN management (activate/deactivate, lock, change, unblock with PUK).
System Requirements:
- Windows XP SP3, Windows Vista SP1/SP2, Windows 7, Windows 8, Windows 8.1 (does not support Windows RT), MAC OS X 10.7, 10.8 and 10.9 with latest upgrades.
- Computer hardware system should meet or exceed recommended system requirements for the installed OS version.
Usage Features
The E5336 offers several user-friendly features:
- Menu-style LCD UI: A menu-style LCD UI allows users to browse information and configure settings by pressing the menu and power buttons. This includes:
- Scanning a 2D barcode to connect to the Internet or download the HUAWEI Mobile WiFi App.
- Turning on/off automatic switchover between 3G and Wi-Fi Internet access modes.
- Turning on/off the WPS function.
- Turning on/off the data roaming function.
- Turning on/off the fast boot function.
- 2D Barcode Easy Connection: For Android devices with the HUAWEI Mobile WiFi App, users can quickly connect to the E5336 by scanning a 2D barcode displayed on the device's LCD.
- HUAWEI Mobile WiFi App: The app can be downloaded by scanning a 2D barcode on the E5336's LCD, providing enhanced management capabilities for Android devices.
- HiLink features: Driverless, Zero installation for ease of setup.
- Five-second fast boot: Quick startup time.
- Press and Play: Simplified operation.
- Traffic statistic: Allows users to monitor their data usage.
- WPS: Wi-Fi Protected Setup for easy and secure wireless connections.
- Standard Micro USB interface: For charging and USB modem functionality.
Maintenance Features
- Online software upgrade: Allows for convenient updates to the device's software.
- Built-in DHCP Server, DNS RELAY and NAT: These features contribute to network management and stability.
- SIM lock: Provides security for the SIM card.
- Built-in UMTS and WLAN high gain antenna: Ensures reliable signal reception and transmission.
Need help?
General
To Next Page
