Please read, and agree to, the Software Licence Agreement 2.
and leave the installation directory unchanged. The software
will start installing, and a progress screen will be displayed.
Once the software and drivers have installed, click ‘Finish’.3.
Your computer will now use the new software to properly 4.
configure your modem. An information balloon will pop up
from your System Tray area to you when the process is
finished. This process may take several minutes.
When the install is finished the Virgin Mobile connection 5.
software will start.
Click ‘Connect’. Open your Internet browser (e.g. Internet 6.
Explorer).
You are now connected to the Internet and ready to start 7.
surfing!
If you’d prefer step by step instructions with some handy
images for reference, visit our online FAQ’s for more help:
virginmobile.custhelp.com
Software installation for Apple OS X
Make sure the modem is powered on.1.
After connecting the USB Modem using the supplied USB 2.
cable, the disk on the modem will automatically open.
Under ‘Install’ or ‘Run Program’, double-click on ‘Virgin Mobile’ 3.
to begin the installation process.
Please read and agree to the Software Licence Agreement and 4.
click ‘Continue’ to proceed.
To Next Page
Loading...
