3 Services and Applications
3.1 Data Service
3.1.1 USB Modem
After you connect the E587 and PC with a USB data cable, the E587 driver is installed
on the PC automatically and the shortcut of the web page is displayed on the PC
desktops. You can configure APN on the E587 web page (or directly use the default
settings) and set up a network connection. Then you can send or receive E-mail,
access the network through wireless connection, and download files through wireless
data channels.
Figure 3-1 One-device access via USB
3.1.2 Wireless Modem
The E587 can be used as a wireless modem when the Wi-Fi is enabled. You can
access the Internet service through setting up the wireless network connection with
the E587.
A maximum of five wireless users can access the E587 at the same time. You can set
up the WLAN with the access point (AP) function.
To Next Page
Loading...
