Huawei E589 - Establishing WPS Connection; WPS Connection Setup

15
Establishing a WPS Connection
If a WiFi client connected to the Mobile WiFi supports the WPS function, a wireless
network key will be automatically generated without manual input. To establish a WPS
connection, perform the following steps:
1. Power on the Mobile WiFi.
2. Start the client.
3. Enable the WPS function of the Mobile WiFi.
Note: After WiFi is enabled, press and hold
until a WPS activation animation is displayed on
the screen to enable the WPS function of the
Mobile WiFi.
4. Enable the WPS function of the client.
Note: For WPS operations on the client, see the user guide of the client.