8
Indicator Description
Table 1 Indicator status description 1
Indicator Status Description
USB
Steady on
The USB port is connected and is working in the host
mode, but no data is transmitted.
Blinks twice a
second
Data is being transmitted on the USB port.
Off
The system is not powered on or the USB port is not
connected.
WPS
Steady on The WPS function is enabled.
Blinking A Wi-Fi terminal is accessing the system.
Off The WPS function is disabled.
WLAN
Steady on The WLAN function is enabled.
Blinking Data is being transmitted on the WLAN port.
Off The WLAN function is disabled.
LAN1–
LAN4
Steady on The Ethernet connection is in the normal state.
Blinking Data is being transmitted on the Ethernet port.
Off The Ethernet connection is not set up.
TEL1–
TEL2
Steady on
The terminal is registered with the softswitch but no
service ows are transmitted.
Blinking Service ows are transmitted.
Off
The terminal is not powered on or fails to be registered
to the softswitch.
LOS/PON See Table 2.
POWER
Steady green The terminal is powered on.
Off The power supply is cut off.
To Next Page
Loading...
Need help?
General
