The appearance shown in this document may be different from the actual appearance
of the product. The actual product provided by the carrier prevails.
Installing the GPON Terminal
1. Do not install GPON terminals outdoors or on the outdoor cabinets.
2. GPON terminals can be mounted onto a wall or be placed on a
workbench. Do not install GPON terminals in other modes, such as the
ceiling.
3.The terminal cannot be connected to other devices such as GPON
terminals, switch and router.
Item Specifications
Dimensions (L x W x H)
220 mm x 160 mm x 32 mm (without
an external antenna)
Weight (including the power
adapter)
About 800 g
System power supply See the nameplate on the device.
Power adapter input 100-240 V AC, 50-60 Hz
Maximum power consumption ≤18 W
Ambient temperature 0ºC- +40ºC
Ambient humidity 5% RH - 95% RH (non-condensing)
Mounting a GPON terminal on the desk
The figure below shows an HG8247H that is horizontally placed on a desk.
To Next Page
Loading...
