Indicator Description
8
Table 1 Indicator status description 1
Indicator Status Description
CATV
Steady on The CATV function is enabled and CATV signals are received
Off The CATV function is disabled or CATV signals are not received.
WPS
Steady on The WPS function is enabled.
Blinking A Wi-Fi terminal is accessing the system.
Off The WPS function is disabled.
WLAN
Steady on The WLAN function is enabled.
Blinking Data is being transmitted on the WLAN port.
Off The WLAN function is disabled.
USB
Steady on
The USB port is connected and is working in the host mode, but
no data is transmitted.
Blinks twice a
second
Data is being transmitted on the USB port.
Off The system is not powered on or the USB port is not connected.
TEL1–
TEL2
Steady on
The terminal is registered with the softswitch but no service ows
are transmitted.
Blinking Service ows are transmitted.
Off
The terminal is not powered on or fails to be registered to the
softswitch.
LAN1–
LAN4
Steady on The Ethernet connection is in the normal state.
Blinking Data is being transmitted on the Ethernet port.
Off The Ethernet connection is not set up.
LOS/PON See Table 2.
POWER
Steady green The terminal is powered on.
Off The power supply is cut off.
To Next Page
Loading...
