3 Indicator Description
Indicator Status Description
POWER Steady on The ONT is powered on.
O The power supply is cut o.
PON/LOS See the following table.
LAN Steady on The Ethernet connection is in the normal state.
Blinking Data is being transmitted over the Ethernet port.
O The Ethernet connection is not set up.
Status
No.
PON Status LOS Status Description
1 O O The ONT is prohibited by the upper-
layer device or blinks abnormally.
Contact the service provider for help.
2 Blinks twice
a second
Blinks twice a
second
3 Blinks twice
a second
O The ONT attempts to set up a
connection with its upper-layer
device.
4 Steady on O A connection is set up between the
ONT and its upper-layer device.
EG8010H
Quick Start for QR code 3 Indicator Description
Issue 04 (2020-07-21) Copyright © Huawei Technologies Co., Ltd. 5
To Next Page
Loading...
