Huawei eSpace EGW1520A - Page 5

Planning Network Access Informati
o
Item Parameter
WAN
Account
PPPoE user name
PPPoE password
Static IP
WAN IP address
WAN subnet mask
a
Starting Configuration ——Netw
o
Static
IP
WAN gateway IP address
Primary DNS server
DHCP
ADSL
PVC Identifier (VPI)
PVC Identifier (VCI)
PPPoE user name
PPPoE password
Wireless
SSID
Wireless
function
Wireless access password
Starting Configuration
b
Logging In to the Web Managemen
t
Connect a PC to a LAN port on the EG
W
Log in to the EGW1520 using Internet E
x
default URL is https://192.168.1.1.
Enter the user name (default: admin) an
d
Log In.
4
c
Starting
Configuration
Choose Quick Setup from the navigatio
n
Choose a country and click Next.
Select a network connection mode acco
r
and click Next. Verify parameter settings
Click Save And Continue and configure
does not need to be configured, click Sa
v
4
o
n
Planning Description
o
rking
ADSL and WAN are available.
The WAN modes include the account, static
IP, and DHCP submodes.
To obtain the network access mode and
data, contact the local network carrier.
Indicates the ID of the EGW1520. The ID is
displayed on a Wi-Fi terminal after the
terminal finds the EGW1520. The default ID
is eSpace EGW_****. **** is the last four
di it i th WLAN MAC dd
di
g
it
s
i
n
th
e
WLAN
MAC
a
dd
ress.
The password is a string consisting of 8 to
63 ASCII characters or 64 hexadecimal
digits. The default password is the WLAN
MAC address of the EGW1520.
t
System
W
1520 using a network cable.
x
plorer 6.0 or a later version on the PC. The
d
password (default: Admin@123) and click
4
n
tree on the web management system.
r
ding to step , set relevant parameters,
.
the audio function. If the audio function
v
e And Exit to exit the configuration wizard.
a