Huawei eSpace IAD104H - Page 24

eSpace IAD104H
Quick Start
4 Manual Configuration (CLI)
Issue 10 (2019-04-09)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
22
Item
Data
IP address of the DNS server
192.168.1.50
IP address of the uplink gateway
192.168.1.1
NOTE
The gateway IP address must be in
the same network segment as the
IAD IP address. Contact the network
administrator to obtain the gateway
IP address.
Procedure
Step 1 Configure the communication protocol.
After the protocol is changed, the IAD will automatically
restart. The data, if not saved, will be lost after the IAD restart.
Therefore, you must save the settings before changing the
protocol.
1. Choose Advanced Configuration > Protocol Mode.
The Protocol Mode page is displayed.
2. Select MGCP and click OK.