Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Parameters marked in the figure are mandatory in the scenario
where the system connects to the IMS network.If the U1900 is used,
set Register mode to individual.
2. Click OK.
Step 9 (Optional) Click Next and configure the SIP digitmap.
A digitmap indicates a dialing rule, which is used to determine
whether the range and length of the dialed number comply
with the dialing rule. The SIP digitmap commonly used by the
IAD is [XABCD*#].T, which is the default value. For details
about the digitmap and configuration procedure, see
Configuration > Manual Configuration (Web) > SIP
Service Configuration > Configuring a SIP Digitmap in the
eSpace IAD104H Product Documentation.
Step 10 Save the settings.
1. Click Next.
The Maintenance > Save Data page is displayed.
2. Click OK.
3. Click Finish.
If you want to configure other data, see the eSpace
IAD104H Product Documentation
---- End
To Next Page
Loading...
