Huawei eSpace IAD104H - Page 43

eSpace IAD104H
Quick Start
5 Configuration (EMS)
Issue 10 (2019-04-09)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
41

You can also run the nms domain command to set the
domain name of the UCEMS server.
In this mode, only one UCEMS server can be configured.
If the DNS mode is used, ensure that the DNS server is available on
the network, and the DNS server is configured.
Step 2 (Optional) Set other parameters according to Table 4-1. You
are advised to retain the default values.
Table 5-1 UCEMS parameter setting commands
Operation
Command
Default Value
Set the access
switch of the
UCEMS
nms access
on
Set the domain
name of the
UCEMS
nms domain
ucems.com
Set the
parameters for
handshake
between the
IAD and the
UCEMS
nms handshake

switch: on

interval: 30
Set the
parameters for
communication
between the
IAD and the
UCEMS
nms

getcom: public

setcom: private

trapcom: public

trapport: 162

register: on