Protect battery modules from mechanical vibration, collision, punctures, and
strong impact. Otherwise, the modules may catch re.
To avoid leakage, overheating, re, or explosions, do not disassemble, alter, or
damage batteries, for example, insert sundries into batteries, squeeze batteries, or
immerse batteries in water or other liquids.
Do not burn batteries. Otherwise, the batteries may catch re or explode.
There is a risk of explosion if the model of the replaced battery is incorrect. The
battery should be replaced with a battery of the model recommended by the
manufacturer.
It is recommended that an independent battery room be used. Before installing
battery modules, prepare
re extinguishing facilities, such as reghting sands
and liquid carbon dioxide re extinguishers, according to the construction
regulations. Before operation, ensure that the battery room is equipped with a
re
extinguishing system that complies with local regulations.
Before unpacking battery modules, ensure that the packing cases are intact and
correctly placed according to the labels on the packing cases during their storage
and transportation. Do not place a battery module upside down, lay it on one side,
or tilt it. Stack the battery modules according to the stacking requirements on the
packing cases. Any bumping or falling may damage the battery modules.
After unpacking battery modules, place them in the required direction. Do not
place a battery module upside down or vertically, lay it on one side, tilt it, or stack
it with other modules. Any bumping or falling may damage the battery modules.
ESS-240V12-(9AhBPVBA04, 7AhBPVBA04) Battery
Pack
Quick Guide 1 Safety Information
Issue 02 (2022-06-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 4
To Next Page
Loading...
