3 Transportation and Storage
Requirements
3.1 Transportation Requirements
● Choose sea or a road with good conditions for transportation to ensure
equipment safety and avoid tilt or jolt.
● The packing case must be secured for transportation, and printed with signs
such as anti-collision and moisture prevention in compliance with local
regulations.
● The battery module cannot be placed upside down or tilted, and must be
protected against falling down, mechanical impact, rains, snows, and falling
into water during transportation.
● Unless otherwise
specied, dangerous goods cannot be mixed with goods
containing food, medicine, animal feed, and their additives in the same
vehicle or container.
3.2 Storage Requirements
1. Batteries should be upright when being stored.
2. Battery packing cases should be stacked in accordance with the stacking
requirements on the external package.
3. The storage environment requirements are as follows:
– Ambient temperature: –15°C to +50°C
– Recommended ambient temperature: 20–30°C
– Recharge temperature: 5–40°C
– Relative humidity: ≤ 95% RH
– In a dry and clean place with proper ventilation
– Away from corrosive and organic substances (including gas)
– Away from direct sunlight
– At least 2 meters away from heat sources (such as a heater)
ESS-240V12-(9AhBPVBA04, 7AhBPVBA04) Battery
Pack
Quick Guide 3 Transportation and Storage Requirements
Issue 02 (2022-06-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 12
To Next Page
Loading...
