Need help?Do you have a question about the Huawei LUNA2000-2.0MWH-1H1 and is the answer not in the manual?
General| Model | LUNA2000-2.0MWH-1H1 |
|---|---|
| Capacity | 2.0 MWh |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
| Nominal Voltage (Single Battery Module) | 51.2 V |
| Cooling Method | Air Cooling |
| Operating Temperature Range | -10°C to 50°C |
| Communication Interface | Ethernet, CAN, RS485 |
| Cycle Life | 6000 cycles at 80% DoD |
General safety precautions and warnings for installation, operation, and maintenance.
Specifies requirements for personnel operating the equipment, including training.
Guidelines for safe cabling, grounding, AC/DC power handling, and maintenance.
Critical safety information and requirements for handling battery packs.
Details on the main components and their configurations within the ESS.
Detailed descriptions of individual system components and their functions.
Criteria for selecting a safe and suitable site for ESS installation.
Procedures for positioning, hoisting, opening doors, grounding, and securing the ESS.
Steps for installing DC power cables, including connections and routing.
Procedure for connecting AC input power cables from the grid supply.
Checklists for equipment appearance, cable connections, and cleanliness.
Verification of ESS installation, grounding, and door functionality.
Overall sequence and steps for powering on the system components.
Final steps and checks before powering on the entire Energy Storage System.
Steps for preparing the PC and logging into the SmartLogger WebUI.
Steps to issue shutdown commands to system components via SmartLogger.
List of common alarms for CMU, their severity, cause, and troubleshooting.
Troubleshooting for alarms related to air conditioners.
Troubleshooting for alarms related to the rectifier module.
Common alarms for ESC/BCU, including possible causes and suggestions.
Troubleshooting for Battery Monitoring Unit (BMU) common alarms.
To Next Page