Figure 4-4 Removing the cover
(a) Cover
If multiple battery packs are installed, install the battery temperature sensor on one battery
pack.
Step 3 Remove the bae plate from the cable hole of the battery temperature sensor,
rotate the
bae plate 180 degrees, and secure it with the removed screws. Route
the battery temperature sensor into the battery pack through the cable hole, and
secure the sensor to the cable bridge with a cable tie.
ESS-240V12-(9AhBPVBA04, 7AhBPVBA04) Battery
Pack
Quick Guide 4 Installation
Issue 02 (2022-06-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 25
To Next Page
Loading...
