Installing the Power Adapter
4
Installing the Power Adapter
In normal conditions, the FWT relies on the external
power adapter for power supply.
1 Insert one end of the power adapter into the DC
input port, and the other end into the power sup
-
ply jack.
2 If the power indicator is in blue, the connection
is correct.
Use the battery only in the case that the electricity
has failed
or the external power adapter is unavail-
able. You must make sure that the battery has been
fully charged before putting it into use.
Installing the Antenna
1 Make sure that the FWT is switched off.
2 Align the antenna with the antenna port on the
FWT host in the direction shown in the figure,
and then screw the antenna, ensuring that the
connection is secure.
Connecting the Terminal
Note
• Switch off the FWT and disconnect the power
adapter.
• Use the cable provided by the manufacturer.
To Next Page
Loading...
