EasyManua.ls Logo

Huawei FusionCharge AC - Product Overview; Technical Specifications

Huawei FusionCharge AC
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preliminary Version
180 mm 145 mm
335 mm
Product Overview
4 5
PV power adaptive charging with a high PV
self-consumption rate.
Automatic phase switchover to maximize PV
power utilization (available on AP22N-EU).
Scheduled charging
Scheduled time-of-use charging allows you to set
when to start and stop a charging session on the
app.
Normal charging
Charging power up to 7.4 kW (single-phase) or
22 kW (three-phase).
Smart authentication
Supports user authentication and denies access
for unauthorized users. Plug-and-play charging is
supported after authentication is disabled.
Supports RFID card management.
Power equalization*
The charger power is dynamically controlled
based on the total premise power to prevent the
premise RCBO from tripping.
Technical Specifications
Dimensions (H x W x D)
Weight
Operating voltage range
Supported earthing system
Frequency
Rated output power
(current)
Single-phase 230 V AC (±20%)
Single-phase, three-wire; TN, TT, IT
50/60 Hz±1 Hz
Single-phase: 7.4 kW (32 A)
Three-phase 400 V AC (±20%)

50/60 Hz±1 Hz
Three-phase: 22 kW (32 A)
Network type
Bluetooth
Ethernet port
RFID
WiFi 2.4 GHz
BLE 5.0
FE 100 Mbit/s
IEC 14443 Type A
WiFi 2.4 GHz
BLE 5.0
FE 100 Mbit/s
IEC 14443 Type A
Operating temperature*
Transportation and
storage temperature
Relative humidity
Altitude*
–35°C to +45°C
–40°C to +70°C
5%–95% RH (non-condensing)
0–2000 m
–35°C to +40°C
–40°C to +70°C
5%–95% RH (non-condensing)
0–2000 m
AP07N-EU AP22N-EU
335 mm x 180 mm x 145 mm
About 3.0 kg
335 mm x 180 mm x 145 mm
About 3.1 kg
IP rating
Standard compliance
IP54
EN 61851-1 2019, IEC 62955 2018
IEC 61008-1 2010, IEC/EN 62196-1
IP54
EN 61851-1 2019, IEC 62955 2018
IEC 61008-1 2010, IEC/EN 62196-1
Charger
* This function is available when an electricity
meter and a Huawei PV inverter of specified
models and versions are installed. Scan the QR
code in "About This Manual" and see detailed
information about the meter in "Meter
Description."
PV power preferred*
RFID card
swiping area
Strip light
Type 2 socket
*AP07N-EU: When the operating temperature ranges from 45°C to 55°C, the output power of the charger is derated.
When the altitude ranges from 2000 m to 4000 m, the output power of the charger is derated.
*AP22N-EU: When the operating temperature ranges from 40°C to 55°C, the output power of the charger is derated.
When the altitude ranges from 2000 m to 4000 m, the output power of the charger is derated.

Related product manuals