Huawei FusionDC1000A - Page 41

Default Value Value Range Setting Remarks
IP address Automatic Automatic, Manual Default value
Subnet mask 192.168.0.10
1.0.0.0–
223.255.255.255
Default value
Gateway 255.255.255.0
0.0.0.0–
255.255.255.255
Default value
MAC address 192.168.0.1
1.0.0.0–
223.255.255.255
Default value
Address 1 1–254 Default value
Baud rate 9600 4800, 9600, 19200, 115200 Default value
COM port address 80 1–254 Default value
COM port baud rate 9600 4800, 9600, 19200, 115200 Default value
Disable Disable, Enable Default value
Disable Disable, Enable Default value
1 1–15 5
Disable Disable, Enable Default value
2 1–8 Default value
1 1–2 Default value
Mode 1 Mode 1, Mode 2 Default value
2.5 2.5–2.9 Default value
Chinese English, Chinese English
- -
Set this parameter
based on the site
- -
Set this parameter
based on the site
- -
Set this parameter
based on the site
000001 - Default value
Enable Enable/Disable Enable
180 90–1095 Default value
Parameter
Component Li Batt.-A1/2/3/4/5
ModbusTCP Setting
IP Setting
RS485 Setting
COM Setting
SmartLi Initial Configuration Parameters
Category
Number of pool systems
System Settings
Communication
Settings
SSH
Cell undervoltage protection
threshold
Pooling system No.
Charging mode
Battery cabinet quantity
Pooling
Key update interval (d)
Setting
YYYY-MM-DD
User Settings
Language
time
Date format
Password
password complexity check