Need help?Do you have a question about the Huawei FusionDC1000A and is the answer not in the manual?
General| Model | FusionDC1000A |
|---|---|
| Capacity | Configurable based on requirements |
| Performance | High-performance |
| Data Protection | RAID |
| Node Configuration | Configurable based on requirements |
| High Availability | Yes |
| Cooling Mode | Air-cooled |
| Power Density | High |
| Deployment Time | Rapid |
Describes the FusionDC1000 solution, its overview, application scenarios, architecture, and key technical specifications.
Lists the target audience for the document, including sales engineers, technical support, and system engineers.
Defines symbols used in the document, such as Danger, Warning, Caution, and Notice.
Explains the FusionDC1000 as a green data center solution for cloud computing.
Lists key features like integration, security, reliability, rapid deployment, low cost, and high efficiency.
Highlights integration, low cost, fast deployment, and energy efficiency benefits.
Details centralized management, O&M, monitoring, and security features.
Mentions PAD, app view, resource automation, and temperature mapping.
Describes deployment scenarios like enterprise IT rooms, wilderness, industrial parks, campuses, and urban areas.
Details typical configurations for cabinet, power, cooling, fire extinguishing, and monitoring systems.
Presents technical specifications for configuration, dimensions, power, cabinets, and backup time.
Introduces the pre-fab. module and its external appearance.
Details the thermal insulation structure using rock wool panels and fire-retardant material.
Describes the pre-fab. module coating and its salt spray resistance.
Illustrates and describes the fireproof end and emergency doors.
Shows interior layouts for N+X and 2N scenarios.
Introduces internal components like cable trays, ceilings, and cabinets.
Details dimensions, types, and load-bearing capacity of overhead cable trays.
Explains suspended ceilings for aisle containment and cable maintenance.
Describes the IT cabinet for server installation and its features.
Details the raised floor installation for cooling product piping.
Describes the sliding doors for aisle containment.
Explains cabinet bases and sliding features for maintenance.
Details external ports for power, optical fiber, and network cables.
Introduces power distribution architectures (N+X, 2N), UPS, and battery systems.
Details product structure and technical specifications of the UPS.
Introduces rPDU types and configurations.
Introduces the SmartLi battery storage system, its features, and structure.
Details the battery module composition and specifications.
Introduces the BCU for power conversion and BMS management.
Details the MIU for battery cabinet communication.
Introduces the MDU for SBCU management functions.
Introduces the power PDB for power distribution.
Describes the AC PDB for controlling power to devices.
Explains the use of smart cooling products for aisle containment and cooling.
Details components, environment, and technical specifications of the cooling product.
Describes the indoor unit components and dimensions.
Lists operating environment specs like temperature, humidity, and altitude.
Provides general technical specifications for the cooling system.
Introduces the outdoor unit of the cooling system.
Details technical specifications of the fan.
Explains the working principle of the low temperature component.
Introduces the iManager NetEco 6000 data center infrastructure management system.
Introduces the ECC800-Pro data center controller.
Details ECC800-Pro configuration and components.
Describes the ECC800-Pro main control module.
Introduces the UIM20A expansion module.
Details the Smart ETH Gateway for power and communication.
Describes the access actuator for door control and security.
Explains the AC actuator for controlling lights/fans.
Details the T/H sensor and its specifications.
Details the IP camera technical specifications.
Details the WiFi module for wireless interaction.
Explains the water sensor for detecting leaks.
Introduces the PAD control panel for wireless access.
Explains the fire linkage principle and system operation.
Details the CE certified fire extinguishing system.
Lists functions and specifications of the control panel.
Explains the heptafluoropropane extinguisher and its properties.
Introduces the standard fire extinguishing system.
Lists functions and specifications of the fire alarm control panel.
Describes fire detection and extinguishing equipment for lithium battery modules.
Describes the integrated cabling system, including cable trays and types of cables used.
Details surge protection for indoor and outdoor signal ports.
Explains internal and external grounding methods and points.
To Next Page