Huawei FusionDC1000A - Low Temperature Component

Figure 5-10 Components
(1) External signal port (2) Electric control box (3) Module subrack
(4) Drive (5) Wet lm humidier (6) Dierential pressure switch
(7) Compressor (8) Drainpipe (9) Refrigerant gas pipe
(10) Refrigerant liquid pipe (11) Air lter (12) Fan
(13) Water pan cover (14) Water pump (15) Transformer (NetCol5000-
A025HNWE2)
● Compressor
The smart cooling product uses a DC variable-frequency compressor that
features compact size, light weight, a long service life, low noise, easy
installation, high reliability, stability, and energy
eciency.
● Oil separator
Separates the lubricant brought out due to discharge of the compressor and
brings back the separated lubricant to the compressor.
● Fan
The
energy-ecient EC fan that supports stepless speed adjustment is used to
reduce the fan energy consumption. A single fan is light and easy to maintain.
If a single fan fails, the entire system does not shut down.
● Evaporator
The
nned-tube evaporator with a high cooling eciency adopts the synergy
eld principle and computational uid dynamics (CFD) to optimize the ow
path design, which greatly improves the heat exchange eciency.
● Electronic expansion valve (EEV)
FusionDC1000A Prefabricated All-in-One Data
Center
Product Description (IT Scenario) 5 Cooling System
Issue 01 (2021-04-20) Copyright © Huawei Technologies Co., Ltd. 53