Huawei HG531s - Ports and Buttons

HG531s V1 300Mbps Wireless ADSL2+ Router
Product Description
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Page 5 of 16
administration functions. It supports the latest TR-069 terminal management standards
and remote upgrades, thus facilitating large-scale deployment and maintenance.
1.2 Hardware Features
1.2.1 Interfaces and Buttons
Figure 1-2 Interfaces and buttons on the HG531s V1
1
2
3
4 5 6
WLAN/
WPS
7
Table 1-1 Interfaces and buttons on the HG531s V1
No. Description
1 Reset button, which is used to restore the factory settings of the
HG531s V1.
2
USB interface, which is used to connect a USB device, such as a Huawei
HSPA USB interface link device.
NOTE:
The maximum voltage/current output from the USB port is 5 V/0.65 A. That is, the
input voltage/current of the USB device connected to the USB port cannot exceed 5
V/0.65 A. Otherwise, the HG531s V1may not work correctly.
3 On/Off button, which is used to power on or off the HG531s V1.
4 Power interface, which is used to connect the HG531s V1 to the power
adapter.
5 LAN interfaces, which are used to connect the HG531s V1 to the Ethernet
interface on the computer.
6 ADSL interface, which is used to connect HG531s V1 to the MODEM
interface on the splitter or to the telephone jack on the wall.