Huawei HG531s - Page 7

HG531s V1 300Mbps Wireless ADSL2+ Router
Product Description
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Page 7 of 16
Off  The HG531s V1 is working in bridging mode.
 The HG531s V1 is working in routing mode, but
the connection to the WAN has not been set up.
 The HG531s V1 is powered off.
WLAN Steady on The WLAN connection is set up, but no data is being
transmitted.
Blinking The WLAN connection is set up, and data is being
transmitted.
Off  The WLAN function is disabled.
 The HG531s V1 is powered off.
WPS Blinking A wireless client, such as a computer installed with a
wireless network adapter, is connecting to the HG531s
V1 using the WPS function. This process lasts for no
longer than 120 seconds.
Off  The WPS function is disabled or faulty.
 The HG531s V1 is powered off.
LAN1 ~
LAN4
Steady on The HG531s V1 is connected to a device properly.
Blinking Data is being transmitted between the HG531s V1 and
the device connected.
Off  No connection is set up on the port.
 The HG531s V1 is powered off.
USB Blinking  The HG531s V1 is being activated through USB
modem.
 Data is being transmitted on the USB port.
Steady on  A portable storage device is connected to the USB
port.
 No data is being transmitted.
Off  The USB port is not connected.
 The HG531s V1 is powered off.