2
When configuring the HG630 V2 for the first time, use an Ethernet cable to
connect the HG630 V2 to a computer
2 Powering On
To power on the HG630 V2, press its power button.
After the HG630 V2 is powered on, the HG630 V2 indicator turns on. The following
table lists how the indicators behave when the HG630 V2 is operating correctly. If the
indicators do not behave as expected, ensure that everything is plugged in correctly.
4 HG630 V2 5 Power adapter 6 Desktop computer
7 Set-top Box 8 Laptop computer 9 Smart Phone
10 Pad
a LINE port b PHONE port c MODEM port
Indicator Expected State Description
Power Steady on The HG630 V2 is powered on.
WAN
Steady on
A digital subscriber line (DSL) connection
has been set up and activated.
Blinking A DSL connection is being activated.
Internet
Steady on
The HG630 V2 is connected to the Internet
in router mode, but no data is being
transmitted.
Blinking
The HG630 V2 is connected to the Internet
in router mode, and data is being
transmitted.
To Next Page
Loading...
Need help?
General
