HUAWEI HG655b Home Gateway
User Guide
Setting the Network-Access Parameters
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-1
5 Setting the Network-Access Parameters
By configuring the HG655b and your computer, you can choose any of the following
methods to surf the Internet:
z
Accessing the Network by the Embedded PPP Dial-Up Software on the HG655b
z
Accessing the Network by the PPP Dial-Up Software on Your Computer
5.1 Accessing the Network by the Embedded PPP
Dial-
matically after the startup. You can access the network after you power
ss,
ity of the HG655b. More details, see "4.1
Step 2
2. .
the DSL link type option button, and keep the default settings of
meters.
5. Click
Up Software on the HG655b
If you select this method for accessing the network, the HG655b starts to set up a dial-up
connection auto
on your computer. To configure the HG655b and your computer for the network acce
do as follows:
Step 1
Log in to the Web-based configuration util
Accessing the Web Configuration Page".
Configure the PTM PVC and ATM PVC.
1. In the navigation tree, choose Basic > ATM.
Click New
3. Enter VPI and VCI in the VPI/VCI text box provided by the Internet Service
Provider.
4. Select EoA from
other para
Submit.
Just keep the default settings for PTM.
Step 3
tion tree on the left of the Web-based configuration utility, choose
.
VC from the Layer2 interface drop-down combo box.
Enable the embedded dial-up function.
1. In the naviga
Basic > WAN.
2. Click New
3. Select a
P
The HG655b supports ADSL/VDSL compliance uplink. When c
hoose the ADSL uplink
lue of VPI and VCI. When choose the
mode, the name of PVC should be composed by the va
VDSL uplink mode, the name of PVC should begin with ptm.
4. Select Enable check box for WAN connection.
To Next Page
Loading...
Need help?
General
