Huawei HG655d - 2.2 Interfaces and Buttons

2.2
Interfaces and Buttons
Figure 2-2 Interfaces and buttons
Table 2-2 Description of the interfaces and buttons
Interface/Button Function
PHONE1, PHONE2 Connects a phone.
LAN1–LAN4 Connect PCs, switches, or other equipment.
RESET
Restarts the equipment if this button is pressed and held
for three to six seconds, restores the factory settings of the
equipment if held for more than six seconds.
NOTE
After you restore the default settings, the customized data
will be lost. So press the RESET button with caution.
WPS Used to start the WPS negotiation.
WLAN Used to enable or disable the WLAN function.
ON/OFF Used to power on or off the HG655d.
POWER Connects a power adapter.
USB
Connects a USB device, such as a specified model of
Huawei HSPA data card or a hard disk.
8
LINE Connects to PHONE
the
DSL Connects to the MODEM interface on the splitter.
interface on the splitter.